Desktop steel honeycomb air suspension vibration isolatorAET series
The AET Series is a series of desktop vibration isolators that bring together an entire high-performance vibration isolation system. At Meiritsu Seiki, many of our previous desktop vibration isolators have been combined into a series. As a result, the AET Series, which combines these vibration isolators with steel honeycomb surfaces tables, consists of desktop air suspension vibration isolators are optimal for optical experiments using a small surface area.
- For Microscopy
- For Measurement
S Type with Automatic Leveler
The S type is equipped with an automatic leveler.This keeps the surface table level even when the load distribution on the spring system is changed. The automatic leveler is constantly connected to an air source of 0.35-0.70Mpa and the air pressure can be reduced with the pressure control valve provided.
Manual Leveling N Type
The N type is provided with a hand pump used for supplying air to the system in order to maintain the surface table level. We recommend this type for use in locations not equipped with an air source.
Clamp-Equipped NC and SC Type
The SC and NC types are equipped with clamps that allow you to fix the surface table in position both quickly and easily.
- S type Specification
- H type Specification
|Vibration isolation method||Special diaphragm air spring|
|Damping method||Air damping using orifices|
|Stndard accessories||S-type:Urethane tube 6mmx3m, Pipimg joint(PT1/4 male threads)x1|
|Vibration isolation method||Same as standard type|
|Table dimensions(mm)||Same as standard type|
|M6 mounting grid|
|Standard accesories||Urethane tube Φ6×3m、Piping hoint(PT1/4 male threads)×1|
Notice:H-type is S type Only.
Complete the form below and press the submit button.*We will respond via email as soon as possible.